Visca over IP PanTilt head

Visca over IP is the widespread network protocol used to control PTZ cameras. This protocol is supported by almost all PTZ camera manufactureres (except Panasonic).
The pan/tilt solution consists of an MP101 pan/tilt head mounted on top of an interfacebox. This box runs on 7.5V, and powers both the interface and pan/tilt head.

The pan/tilt and zoom can be controlled via Visca over IP control panels, e.g. PTZ-link controller PTZ-link.
IP settings can be changed in an embedded webpage. The MP101 head does not support presets. The interfacebox can be tripod mounted with a 1/4" screw.